Published at Thursday, February 21st, 2019 - 18:48:34 PM. Lamps. By Valere Fabre.
Cover your existing lamp shades or lamp shade frames with your chosen materials. Glue in place using a glue gun folding in the edges to neaten them. Fabric may need to be stiffened by using iron on backing. (Apply this after you cut the fabric otherwise you will have more difficulty cutting the shape. If necessary, paper can also be stiffened by gluing onto thin card. If covering a shade in fabric, in addition to applying glue, stitch the fabric in place with small stitches around the top and bottom of the frame to secure into place.
If you have used a patterned fabric or paper you will probably not need much in the way of decoration although you might like to add a braid trim around the edges in a coordinating color. If you have made a plain shade however you can really go to town adding beads, sequins, fringing and the like. Your glue gun will come in handy once again for attaching anything you desire to your shade. Use your imagination and create something very special and unique but remember that you will have to replicate the process for each individual shade so make sure you don’t run out of trimmings.
Any content, trademark’s, or other material that might be found on the Hurconotes website that is not Hurconotes’s property remains the copyright of its respective owner/s. In no way does Hurconotes claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.